1974 Newport Holiday 20
Description
The Holiday 20 is a 19.5ft fractional sloop designed by Harry R. Sindle and built in fiberglass by Lockley Newport Boats (USA) since 1973. The Holiday 20 is an ultralight sailboat which is a very high performer. It is reasonably stable / stiff and has a low righting capability if capsized. It is best suited as a day-boat.
The standard boat dimensions
| i | 18 ft |
|---|---|
| j | 7 ft |
| p | 22.75 ft |
| e | 9.83 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 18 ft | 7 ft | 22.75 ft | 9.83 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | * 18.35 ft - (5593 mm) |
| Foot | * 11.55 ft - (3520 mm) |
| Leech | * 16.88 ft - (5145 mm) |
| Perc LP | * 165 |
| Area | * 159 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | * 18.35 ft - (5593 mm) |
| Foot | * 11.61 ft - (3539 mm) |
| Leech | * 17.02 ft - (5188 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 10.5 ft - (3200 mm) |
| Deck Angle | * 4.01 ° |
| Area | * 96.33 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | 16.5 ft - (5029 mm) |
| Foot | 8 ft - (2438 mm) |
| Leech | 14.5 ft - (4420 mm) |
| Percentage LP | * 100.43 % |
| Length Perpendicular | * 7.03 ft - (2143 mm) |
| Deck Angle | * 7.26 ° |
| Area | * 58 ft² |
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 22.75 ft - (6934 mm) |
| Foot | * 9.83 ft - (2996 mm) |
| Leech-AftHdBd | * 24.26 ft - (7394 mm) |
| Tack Ang | * 88 ° |
| Diag (clew/head) | * 24.47 ft - (7458 mm) |
| Head (inches) | * 4.5 in |
| Area (no Roach) | * 115.53 ft² |
| Sail Type | SPINNAKER |
|---|---|
| Stays | * 18.35 |
| MidGirth | * 12.6 ft - (3840 mm) |
| Foot | * 12.6 ft - (3840 mm) |
| Perc LP | * 180 |
| Area | * 197 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.