Dyer Dink

Description

The Dyer Dink is a 10-foot fiberglass dinghy produced by The Anchorage, Inc. (Dyer Boats) in Warren, Rhode Island, renowned as a versatile tender for yachts and a stable platform for rowing or small outboard use. Introduced in the 1930s as a wooden design by Philip L. Rhodes, it transitioned to fiberglass in the 1950s, becoming one of the earliest production fiberglass boats. Designed as a utility tender rather than a dedicated sailor like the Dyer Dhow 9' or 12½', the Dink prioritizes load-carrying capacity (up to 650 lb.), ease of rowing, and towability over sailing performance. It's a staple for coastal cruisers, yacht clubs, and classic boat enthusiasts, often seen trailing behind larger vessels or used for shore runs. While a sailing kit was offered historically, the Dink is primarily a rowing or motoring vessel, embodying Dyer's reputation for rugged, timeless designs rooted in Rhode Island's yachting heritage.

Construction Details

Designer Philip Rhodes
Builder Dyer Boats
Length 10.000 ft
LOA 10.000 ft
Beam 4.530 ft
Displacement 135 lb
Max Draft 3.920 ft
Min Draft 0.500 ft
Request A Sail Quote

The standard boat dimensions

i -
j -
p 14 ft
e 8 ft
p2 -
e2 -
i2 -
j2 -

Sails

Sail Type MAINSAIL
Luff 14 ft - (4267 mm)
Foot 8 ft - (2438 mm)
Leech * 15.24 ft - (4645 mm)
Tack Angle * 84.31 °
Diagonal 15.42 ft - (4700 mm)
Head (inches) * 3.5 in - (89 mm)
Area * 57.48 ft²
Comments The boltrope is run up a slot in the mast. The foot is loose.

Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.