Ranger 26 Std Rig

Description

5860 lbs. Disp. 2050 lbs. Ballast 21'9" LWL 8'8" Beam 4'4" Draft 35' mast height above DWL

Construction Details

Designer Mull, Gary
Length 26.000 ft
Request A Sail Quote

The standard boat dimensions

i 33 ft
j 11.50 ft
p 26.40 ft
e 10 ft
p2 -
e2 -

Sails

Sail Type ASYMMETRICAL
Luff 34 ft - (10363 mm)
Foot 19 ft - (5791 mm)
Leech 32 ft - (9754 mm)
Perc LP * 165
Area * 484 ft²
Sail Type DRIFTER
Luff * 33.2 ft - (10119 mm)
Foot * 19.58 ft - (5968 mm)
Leech * 29.5 ft - (8992 mm)
Perc LP * 150
Length Perp * 17.25
Deck Angle * 9.04 °
Area * 286.31 ft²
Sail Type GENOA
Luff 33.2 ft - (10119 mm)
Foot 16.083 ft - (4902 mm)
Leech 31.167 ft - (9500 mm)
Percentage LP * 130.17 %
Length Perpendicular * 14.97 ft - (4563 mm)
Deck Angle * 2.18 °
Area * 248.58 ft²
Sail Type GENOA
Luff * 33.2 ft - (10119 mm)
Foot * 18.77 ft - (5721 mm)
Leech * 31.04 ft - (9461 mm)
Percentage LP * 150 %
Length Perpendicular * 17.25 ft - (5258 mm)
Deck Angle * 3.99 °
Area * 286.38 ft²
Sail Type GENOA
Luff 31.75 ft - (9677 mm)
Foot 16.75 ft - (5105 mm)
Leech 29.75 ft - (9068 mm)
Percentage LP * 134.78 %
Length Perpendicular * 15.5 ft - (4724 mm)
Deck Angle * 3.09 °
Area * 246.02 ft²
Sail Type JIBSAIL
Luff 32.5 ft - (9906 mm)
Foot 12.67 ft - (3862 mm)
Leech 29.5 ft - (8992 mm)
Percentage LP * 99.91 %
Length Perpendicular * 11.49 ft - (3502 mm)
Deck Angle * 5.67 °
Area * 186.77 ft²
Sail Type JIBSAIL
Luff 28 ft - (8534 mm)
Foot 14.5 ft - (4420 mm)
Leech 24.5 ft - (7468 mm)
Percentage LP * 110.26 %
Length Perpendicular * 12.68 ft - (3865 mm)
Deck Angle * 9.81 °
Area * 177.5 ft²
Sail Type MAINSAIL
Luff * 26.4 ft - (8047 mm)
Foot * 10 ft - (3048 mm)
Leech-AftHdBd * 27.69 ft - (8440 mm)
Tack Ang * 88 °
Diag (clew/head) * 27.9 ft - (8504 mm)
Head (inches) * 4.5 in
Area (no Roach) * 136.24 ft²
Sail Type SPINNAKER
Stays * 33.2
MidGirth * 20.7 ft - (6309 mm)
Foot * 20.7 ft - (6309 mm)
Perc LP * 180
Area * 584 ft²

Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.