Hunter 375wk Frac Sloop
Description
The HUNTER 375WK FRAC SLOOP is a sailboat designed by Hunter Marine. Her generous sail plan delivers excellent light-air performance.
The standard boat dimensions
i | 53.94 ft |
---|---|
j | 13.53 ft |
p | 48.99 ft |
e | 15.50 ft |
p2 | - |
e2 | - |
i2 | - |
j2 | - |
I | J | P | E | P2 | E2 | I2 | J2 |
---|---|---|---|---|---|---|---|
53.94 ft | 13.53 ft | 48.99 ft | 15.50 ft | - | - | - | - |
Sails
Sail Type | MAINSAIL |
---|---|
Luff | * 48.99 ft - (14932 mm) |
Foot | * 15.5 ft - (4724 mm) |
Leech | * 50.6 ft - (15423 mm) |
Tack Angle | * 88 ° |
Diagonal | * 50.87 ft - (15505 mm) |
Head (inches) | * 6 in - (152 mm) |
Area | * 390.13 ft² |
Sail Type | JIBSAIL |
---|---|
Luff | * 44.49 ft - (13561 mm) |
Foot | * 17.32 ft - (5279 mm) |
Leech | * 40.03 ft - (12201 mm) |
Percentage LP | * 115 % |
Length Perpendicular | * 15.56 ft - (4743 mm) |
Deck Angle | * 11.97 ° |
Area | * 346.13 ft² |
Sail Type | GENOA |
---|---|
Luff | * 52.83 ft - (16103 mm) |
Foot | * 21.35 ft - (6507 mm) |
Leech | * 50.48 ft - (15386 mm) |
Percentage LP | * 150.04 % |
Length Perpendicular | * 20.3 ft - (6187 mm) |
Deck Angle | * 3.96 ° |
Area | * 536.24 ft² |
Sail Type | DRIFTER |
---|---|
Luff | * 52.83 ft - (16103 mm) |
Foot | * 22.07 ft - (6727 mm) |
Leech | * 48.61 ft - (14816 mm) |
Perc LP | * 150.04 % |
Length Perp | * 20.3 ft - (6187 mm) |
Deck Angle | * 9.03 ° |
Area | * 536.21 ft² |
Sail Type | ASYMMETRICAL |
---|---|
Luff | * 52.83 ft - (16103 mm) |
Foot | * 22.32 ft - (6803 mm) |
Leech | * 48.6 ft - (14813 mm) |
Perc LP | * 165 % |
Area | * 884 ft² |
Sail Type | SPINNAKER |
---|---|
Stays | * 52.83 ft - (16103 mm) |
MidGirth | * 24.35 ft - (7422 mm) |
Foot | * 24.35 ft - (7422 mm) |
Perc LP | * 180 % |
Area | * 1093 ft² |
Sail Type | STORMJIB |
---|---|
Luff | * 30.59 ft - (9324 mm) |
Foot | * 9.69 ft - (2954 mm) |
Leech | * 26.57 ft - (8099 mm) |
Perc LP | * 60.01 % |
Length Perp | * 8.12 ft - (2475 mm) |
Deck Angle | * 19.01 ° |
Area | * 124.17 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.