Delaware Ducker

Description

The Delaware Ducker is a classic, lightweight wooden skiff originating from the late 19th and early 20th centuries, designed primarily as a hunting boat for pursuing rail birds (hence "ducker") in the marshes and tributaries of Delaware Bay. Evolving around Philadelphia and Wilmington yards, it combines the agility of a canoe with the stability of a skiff, making it seaworthy for exposed bay shores, tidal creeks, and choppy conditions. At around 15-16 feet, it's versatile for rowing, sailing, or poling, often half-decked for gear storage during hunts. Modern builders favor lapstrake (clinker) construction with cedar planking over oak frames, and some adapt it with skin-on-frame or plywood hybrids for lighter weight and easier transport.

Custom sail calculations are not possible for this boat as no I, J, P and E dimensions are available.

Construction Details

Designer Unknown
Length 15.000 ft
Request A Sail Quote

The standard boat dimensions

i -
j -
p -
e -
p2 -
e2 -
i2 -
j2 -

Sails

Sail Type SPRIT
Luff 7.67 ft - (2338 mm)
Foot 8.83 ft - (2691 mm)
Leech 10.67 ft - (3252 mm)
Tack Angle * 74.97 °
Diag (clew/throat) 10.083 ft - (3073 mm)
Head 4.5 ft - (1372 mm)
Area * 55.3 ft²

Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.