BENETEAU First Class 12
Description
LWL 10.34 m Beam 3.80 m Draft 1.80 m Disp. 4300kg Ballast 1960kg Produced from 1985-1986
The standard boat dimensions
| i | 48.23 ft |
|---|---|
| j | 14.11 ft |
| p | 42.36 ft |
| e | 16.04 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 48.23 ft | 14.11 ft | 42.36 ft | 16.04 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | SPINNAKER |
|---|---|
| Stays | * 47.74 |
| MidGirth | * 25.4 ft - (7742 mm) |
| Foot | * 25.4 ft - (7742 mm) |
| Perc LP | * 180 |
| Area | * 1031 ft² |
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 42.36 ft - (12911 mm) |
| Foot | * 16.04 ft - (4889 mm) |
| Leech-AftHdBd | * 44.42 ft - (13539 mm) |
| Tack Ang | * 88.01 ° |
| Diag (clew/head) | * 44.77 ft - (13646 mm) |
| Head (inches) | * 6 in |
| Area (no Roach) | * 347.48 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | 40.2 ft - (12253 mm) |
| Foot | * 18.43 ft - (5617 mm) |
| Leech | * 35.41 ft - (10793 mm) |
| Percentage LP | * 115.02 % |
| Length Perpendicular | * 16.23 ft - (4947 mm) |
| Deck Angle | * 11.96 ° |
| Area | * 326.25 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | 47.74 ft - (14551 mm) |
| Foot | * 22.56 ft - (6876 mm) |
| Leech | * 45.18 ft - (13771 mm) |
| Percentage LP | * 149.96 % |
| Length Perpendicular | * 21.16 ft - (6450 mm) |
| Deck Angle | * 3.98 ° |
| Area | * 505.1 ft² |
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | * 47.74 ft - (14551 mm) |
| Foot | * 23.28 ft - (7096 mm) |
| Leech | * 43.92 ft - (13387 mm) |
| Perc LP | * 165 |
| Area | * 834 ft² |
| Sail Type | STORMJIB |
|---|---|
| Luff | * 27.64 ft - (8425 mm) |
| Foot | * 10.38 ft - (3164 mm) |
| Leech | * 23.24 ft - (7084 mm) |
| Perc LP | * 60.03 |
| Length Perp | * 8.47 |
| Deck Angle | * 19 ° |
| Area | * 117.07 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.