Beneteau First 41s5
Description
The BENETEAU FIRST 41S5 is a sailboat designed by Beneteau Yachts. Her generous sail plan delivers excellent light-air performance.
The standard boat dimensions
| i | 49.21 ft |
|---|---|
| j | 13.12 ft |
| p | 50.52 ft |
| e | 16.73 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 49.21 ft | 13.12 ft | 50.52 ft | 16.73 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | MAINSAIL |
|---|---|
| 23 | * 50.52 |
| 10 | * 16.73 |
| 24.55 | * 52.25 |
| 88 | * 88 |
| 24.76 | * 52.66 |
| 4.5 | * 6 |
| 118.76 | * 429.85 |
| Sail Type | JIBSAIL |
|---|---|
| Luff | 40.74 ft - (12418 mm) |
| Foot | * 16.93 ft - (5160 mm) |
| Leech | * 36.34 ft - (11076 mm) |
| Percentage LP | * 115.02 % |
| Length Perpendicular | * 15.09 ft - (4599 mm) |
| Deck Angle | * 12.05 ° |
| Area | * 307.34 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | 48.38 ft - (14746 mm) |
| Foot | * 20.81 ft - (6343 mm) |
| Leech | * 46.03 ft - (14030 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 19.68 ft - (5998 mm) |
| Deck Angle | * 4.05 ° |
| Area | * 476.02 ft² |
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | * 48.38 ft - (14746 mm) |
| Foot | * 21.65 ft - (6599 mm) |
| Leech | * 44.51 ft - (13567 mm) |
| Perc LP | * 165 % |
| Area | * 786 ft² |
| Sail Type | SPINNAKER |
|---|---|
| Stays | * 48.38 ft - (14746 mm) |
| MidGirth | * 23.62 ft - (7199 mm) |
| Foot | * 23.62 ft - (7199 mm) |
| Perc LP | * 180 % |
| Area | * 971 ft² |
| Sail Type | STORMJIB |
|---|---|
| Luff | * 28.01 ft - (8537 mm) |
| Foot | * 9.48 ft - (2890 mm) |
| Leech | * 24.05 ft - (7330 mm) |
| Perc LP | * 59.98 % |
| Length Perp | * 7.87 ft - (2399 mm) |
| Deck Angle | * 18.95 ° |
| Area | * 110.23 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.