American 2+2 Mini-Ton

Description

The American 2+2 Mini-Ton (also known as the American 22 Mini-Ton) is a classic American pocket cruiser-racer sailboat designed by Ron Bertholf and built by American Fiberglass Corporation (AFC) in the early 1970s. Introduced around 1973, this fractional sloop with a swing keel was created to compete in the Mini-Ton class under the International Offshore Rule (IOR), emphasizing speed and simplicity for day sailing, club racing, and short coastal cruises. The "2+2" name refers to its seating capacity (two adults plus two children or smaller passengers), while the "Mini-Ton" nods to its racing heritage. At just under 17 feet LOA, it's a trailerable, lightweight fiberglass boat suitable for inland lakes, protected bays, or light coastal use, but not for offshore or heavy-weather sailing due to its planing hull and low stability. Production was limited (exact numbers unknown, but likely dozens to low hundreds), as AFC focused on small, affordable designs before fading in the mid-1970s.

Construction Details

Designer Ron Bertholf
Length 17.000 ft
LOA 20.750 ft
LWL 17.670 ft
Beam 7.830 ft
Displacement 2500 lb
Max Draft 2.170 ft
Request A Sail Quote

The standard boat dimensions

i 20 ft
j 6.50 ft
p 19.75 ft
e 8.30 ft
p2 -
e2 -

Sails

Sail Type MAINSAIL
Luff * 19.75 ft - (6020 mm)
Foot * 8.3 ft - (2530 mm)
Leech * 20.99 ft - (6398 mm)
Tack Angle * 87.97 °
Diagonal * 21.15 ft - (6447 mm)
Head (inches) * 3.5 in - (89 mm)
Area * 84.48 ft²
Sail Type JIBSAIL
Luff 17.25 ft - (5258 mm)
Foot 7.5 ft - (2286 mm)
Leech 15 ft - (4572 mm)
Percentage LP * 100 %
Length Perpendicular * 6.5 ft - (1981 mm)
Deck Angle * 11.85 °
Area * 56.1 ft²
Sail Type GENOA
Luff 19.98 ft - (6090 mm)
Foot * 10.52 ft - (3206 mm)
Leech * 18.76 ft - (5718 mm)
Percentage LP * 150 %
Length Perpendicular * 9.75 ft - (2972 mm)
Deck Angle * 4.06 °
Area * 97.4 ft²
Sail Type ASYMMETRICAL
Luff 20 ft - (6096 mm)
Foot 11 ft - (3353 mm)
Leech 18.5 ft - (5639 mm)
Perc LP * 165 %
Area * 165 ft²

Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.